1. Wall treatment: Before applying wallpaper, the wall should be treated first. This includes cleaning the wall to ensure that it is clean, flat, and free of loose material. If there is old paint or wallpaper on the wall, it needs to be removed thoroughly. In addition, it is necessary to repair the potholes on the wall and sand the surface with sandpaper to make it smooth and even.
2. Measurement and cutting: After the wall treatment is completed, it is necessary to measure the wall and calculate the amount of wallpaper used. Then cut the wallpaper based on the measurement results. When cutting, the height of each wallpaper should be about 10 centimeters higher than the actual height of the wall for later trimming. At the same time, attention should be paid to maintaining the symmetry of the wallpaper to ensure a beautiful effect when pasted.
3. Apply glue: Apply glue evenly on the back of the wallpaper, then fold the wallpaper in half to soften for a period of time. During the gluing process, it is important to avoid the glue from sticking to the surface layer of the wallpaper. In addition, it is necessary to apply glue on the wall, with a width wider than the wallpaper, to ensure that the wallpaper can be firmly attached to the wall.
4. Wallpaper laying: When laying wallpaper, you can start from the corner of the wall and gradually smooth it out from top to bottom, from the middle to both sides. It should be noted that during the laying process, the wallpaper should be kept flat and bubbles should be avoided. If there are patterns on the wallpaper, it is necessary to ensure accurate alignment of the patterns. In addition, attention should be paid to time when laying to avoid the glue drying too quickly.
5. Edge trimming and cleaning: After the wallpaper is laid, it is necessary to trim the edges of the wallpaper and remove excess glue. For wallpaper with patterns, it is necessary to cut at the overlapping areas and ensure that the patterns are aligned accurately. In addition, it is necessary to carefully treat the switch panel and other parts to ensure the overall aesthetic effect of the wallpaper
